*** Andy Steere's Eagle-3D Assembly Images ***

These are pictures of the assembly process of the Eagle-3D Profile ARF from from Power Line Hobbies.

First job was to remove all of Troy's radio gear. I still had the gear from the Lanier Razor, digital servos, fancy ball-bearing/carbon-fiber/titianium linkages, etc... which I intended to install.

Click on the number below each image for a larger version of the picture (larger number, larger version of the picture)


2272 / 1024 / 640 - As Troy set it up.
2272 / 1024 / 640 - temporary placement...
2272 / 1024 / 640 - intended me to buy it.

2272 / 1024 / 640 - stripped of Troy's gear
2272 / 1024 / 640 -
2272 / 1024 / 640 -

2272 / 1024 / 640 - sticks/clamps keep elev straight.
2272 / 1024 / 640 - Elevator servo installation.
2272 / 1024 / 640 -

2272 / 1024 / 640 - Rudder link moved to stop binding.
2272 / 1024 / 640 - Right aileron.
2272 / 1024 / 640 - Left aileron.

2272 / 1024 / 640 - Added MPI LED-ChargeSwitch.
2272 / 1024 / 640 - Moved motor to better line up.
2272 / 1024 / 640 - Moved lipos closer to thrust line.

2272 / 1024 / 640 - "Key" enables/disables power.
2272 / 1024 / 640 - MEC SuperBox@5:1, APC16x8E.
2272 / 1024 / 640 - Sullivan tailwheel (5-12 lb. size)

2272 / 1024 / 640 - 2.75" Dubro lightweight wheels.
2272 / 1024 / 640 - Hatches for radio gear.
2272 / 1024 / 640 - The Profile Brotherhood Flag.

Click here to return to the main Eagle-3D page.

©COPYRIGHT NOTICE: You are granted permission to view these images while accessing these web pages, but I retain all rights to the images and they may not be used for any other purpose without my permission.

Copyright 2005 - Andy Steere

Last modified on 11/16/2005

Counter