1600 / 1024 / 640 - 1/8" Dark blue pinstripe
1600 / 1024 / 640 - Decals applied to tail.
1600 / 1024 / 640 - Start RCS 140 Install.
1600 / 1024 / 640 - Fits completely inside cowl!
1600 / 1024 / 640 - Painted inside high-temp black.
1600 / 1024 / 640 - installed tailwheel and horn.
1600 / 1024 / 640 - 2" Klett Tailwheel added.
1600 / 1024 / 640 - MK Horns all around...
1600 / 1024 / 640 - Elevators are not very scale.
1600 / 1024 / 640 - Gear and pants installed.
1600 / 1024 / 640 - Pinholes hold epoxy better.
1600 / 1024 / 640 - 1/2" standoffs of birch-ply.
1600 / 1024 / 640 - Pilot trimmed and installed.
1600 / 1024 / 640 - Wing mounted!
1600 / 1024 / 640 - Steel mounting bolts.
1600 / 1024 / 640 - Right side fits good.
1600 / 1024 / 640 - Left side fits good too.
1600 / 1024 / 640 - Throttle & Choke linkages.
1600 / 1024 / 640 - Used camera as inspection mirror.
1600 / 1024 / 640 - Zoomed to size servo-tube.
1600 / 1024 / 640 - Ready to epoxy stab.
1600 / 1024 / 640 - Measured, then weighed down.
1600 / 1024 / 640 - Starting to look like an airplane!
1600 / 1024 / 640 - Epoxied fin and rudder.
1600 / 1024 / 640 - Now install servos.
1600 / 1024 / 640 - Big wing!
1600 / 1024 / 640 - MK ball-bearing control system.
1600 / 1024 / 640 - Elevator half and rudder on right.
1600 / 1024 / 640 - Other elevator half on the left.
1600 / 1024 / 640 - Mixing the elevator halfs with TX.
1600 / 1024 / 640 - Radio System Diagram
1600 / 1024 / 640 - Ignition System Diagram
1600 / 1024 / 640 - Servo Control Diagram.
