*** Andy Steere's Gee Bee Y Refit Weights Page ***


Below is a table of weights of the old RCS-140 installation and a new table for the ZDZ-40. A little over a pound difference in the engines+accessories. Removing the choke servo and 0.5oz of lead from the nose accounts for the difference in final flying weight, compared to the engine totals. Refer to the original weights page for more weight data.


ITEM

GRAMS

OUNCES

POUNDS

RCS140 w/Ignition,muffler 1,079.0 38.06 2.379
Engine Mount 168.5 5.94 0.371
APC 16x8 + 1" prop hub 133.5 4.71 0.371
Flight Hardware 28.4 1.00 0.063
1800mah 4.8v Ign battery 187.1 6.60 0.413
Custom Y-extension 9.7 0.34 0.021
RCS-140 TOTAL: 1,606.2 56.65 3.541

GBY with RCS-140:

6,860.0

245.00

15.313


ITEM

GRAMS

OUNCES

POUNDS

ZDZ 40 RV-L (bare) 1,241.7 43.80 2.738
BCM Muffler w/screws 256.8 9.06 0.566
Ignition Module 133.5 4.71 0.294
6-bolt Hub Hardware 86.5 3.05 0.191
1100mah 4.8v Ign Battery 53.0 1.87 0.117
Custom Y-extension 9.7 0.34 0.021
20x10 Bambula Prop 90.8 3.20 0.200
2.25" Forgues Standoffs 120.3 4.24 0.265
8ea #8x1" bolt+washers 33.0 1.16 0.073
ZDZ-40 TOTAL: 2,025.3 71.44 4.465

GBY with ZDZ-40:

7,252.0

259.00

16.188


ITEM

GRAMS

OUNCES

POUNDS

20x10 Bambula Prop 90.8 3.20 0.200
22x8 Bambula Prop 100.3 3.54 0.221

Click here to return to the Gee Bee Y refit page.


©COPYRIGHT NOTICE: You are granted permission to view these images while accessing these web pages, but I retain all rights to the images and they may not be used for any other purpose without my permission.

Copyright 2003 - Andy Steere

Last modified on 04/15/2003


Counter
since July 15, 2002.