*** Andy Steere's Katana 35 ES ARF Images ***
These are pictures of my Katana 35 ES from Accel Hobby as it came out of the box. Purchased 06/24/2005 from HobbyTownUSA in Columbia, MO. Here is the equipment I intend to use:
Razor RZ-24-3650 Brushless motor.
Cobri 20 4:1 Gearbox (s72/p18).
Castle Creations Phoenix-35 35amp Brushless Speed controller.
Tanic 2150mah 10-12C 3cell lithium polymer Batteries.
Hitec Electron 6 Receiver.
Dymond 200BB Servos. (these suck wind... get Futaba 3101's instead)
2272 / 1024 / 640 - Box as received. |
2272 / 1024 / 640 - Wing with Ailerons. |
2272 / 1024 / 640 - Bottom side of wing. |
2272 / 1024 / 640 - Closeup. |
2272 / 1024 / 640 - Stab and wing fairings. |
2272 / 1024 / 640 - |
2272 / 1024 / 640 - Fuselage with rudder. |
2272 / 1024 / 640 - Rudder alone. |
2272 / 1024 / 640 - Not the best fit I've seen, |
2272 / 1024 / 640 - but not too bad. |
2272 / 1024 / 640 - Cutout for horizontal stab. |
2272 / 1024 / 640 - Determine wing centerline. |
2272 / 1024 / 640 - Motor stick in less than ideal place. |
2272 / 1024 / 640 - Internal construction. |
2272 / 1024 / 640 - Frong and rear servo locations. |
2272 / 1024 / 640 - Manual and included hardware. |
2272 / 1024 / 640 - Extra hardware pack included. |
2272 / 1024 / 640 - Factory decals. |
Click here to return to the main Katana 35 page.
©COPYRIGHT NOTICE: You are granted permission to view these images while accessing these web pages, but I retain all rights to the images and they may not be used for any other purpose without my permission.
Copyright 2005 - Andy SteereLast modified on 09/16/2005