*** Andy Steere's P-38 FOAMY Assembly Images ***

These are pictures and such of an P-38 FOAMY, during assembly.

Here is the equipment I used:

Esskay 400XT Brushless Motor (pair).
APC 10x3.8SF or 9x6SF props (pair).
Castle Creations Thunderbird-18 18amp Brushless Speed controllers (pair).
ThunderPower 1320mah Pro-Lite and Tanic 1500/1550mah 10-12C 3cell lithium polymer Batteries (pair).
Hitec HS-55 Servos (two aileron, one elevator, no rudder).
Hitec 555 RX.

Click on the number below each image for a larger version of the picture (larger number, larger version of the picture)


2816 / 1024 / 640 - Foam parts.
2816 / 1024 / 640 - white on the bottom
2816 / 1024 / 640 - hardware pack

2816 / 1024 / 640 - install CF-tube wing spar
2816 / 1024 / 640 - Cut and bevel ailerons
2816 / 1024 / 640 - Same with elevator

2816 / 1024 / 640 - good detail, but heavy.
2816 / 1024 / 640 - Hot glue mostly (also heavy)
2816 / 1024 / 640 - starting to come together.

2816 / 1024 / 640 - electronics installed.
2816 / 1024 / 640 -
2816 / 1024 / 640 -

2816 / 1024 / 640 -
2816 / 1024 / 640 -
2816 / 1024 / 640 -

Click here to return to the main P-38 FOAMY page.

©COPYRIGHT NOTICE: You are granted permission to view these images while accessing these web pages, but I retain all rights to the images and they may not be used for any other purpose without my permission.

Copyright 2007 - Andy Steere

Last modified on 06/06/2007

Counter