*** Andy Steere's E-Flite Ultimate-FX Assembly Images ***


These are pictures of the assembly process of an Ultimate FX from E-Flite / Horizon Hobby.


Click on the number below each image for a larger version of the picture (larger number, larger version of the picture)



2272 / 1024 / 640 - Glue strut to top wing.

2272 / 1024 / 640 - both sides.

2272 / 1024 / 640 - glue onto bottom wing.

2272 / 1024 / 640 - measure, mark, glue.

2272 / 1024 / 640 -

2272 / 1024 / 640 -

2272 / 1024 / 640 - decent fit.

2272 / 1024 / 640 - looking like an Ultimate!

2272 / 1024 / 640 -

2272 / 1024 / 640 - glue in CF rods.

2272 / 1024 / 640 -

2272 / 1024 / 640 -

2272 / 1024 / 640 - Looking good.

2272 / 1024 / 640 - rods tied together.

2272 / 1024 / 640 - Adds great stiffness to wing.

2272 / 1024 / 640 - install stab and elevators.

2272 / 1024 / 640 - measure, mark, glue.

2272 / 1024 / 640 - install elevator servo.

2272 / 1024 / 640 - rudder servo and RX.

2272 / 1024 / 640 - Aileron servo.

2272 / 1024 / 640 - installed motor, cowl.

2272 / 1024 / 640 - getting there...

2272 / 1024 / 640 - install elevator pushrod.

2272 / 1024 / 640 - screw on cowl.

2272 / 1024 / 640 - connect all four ailerons.

2272 / 1024 / 640 - landing gear installed.

2272 / 1024 / 640 -

2272 / 1024 / 640 - aileron servo linkage.

2272 / 1024 / 640 - stick with velcro for lipo.

2272 / 1024 / 640 - clean up extensions, go fly!

Click here to return to the main Ultimate-FX page.


©COPYRIGHT NOTICE: You are granted permission to view these images while accessing these web pages, but I retain all rights to the images and they may not be used for any other purpose without my permission.

Copyright 2005 - Andy Steere

Last modified on 11/22/2005


Counter